Meyer LPV 3, Руководство пользователя

Страница: 2 / 72

3
2
EC Declaration of Conformity
Introduction
Snow and ice, despite the beauty it may impart to
a bleak winter landscape, poses the dual threat
of inconvenience and danger. The environmental
conditions associated with snow and ice, not to
mention the health hazards and economic loss
it may impose, seriously endanger thousands of
lives annually. Business and industry suffer, and
millions of snowbelt residents may affected by a
single snowstorm.
Meyer Products LLC has published this
manual to help you get the maximum
performance from your Meyer spreader and
familiarize you with the features designed for
efficiency and safety; be sure you recognize
and understand them. Follow recommended
operation and maintenance instructions, so
when the storm hits, your Meyer spreader
will be ready and you will know how to spread
like a pro.
DO NOT EQUIP ANY VEHICLE WITH A
SPREADER WITHOUT CONSULTING VEHICLE
MANUFACTURERS’ RECOMMENDATIONS.
Vehicles equipped with Meyer spreaders
installed may be so equipped as to meet vehicle
manufacturers’ specifications and recommended
options for material spreading use. Most vehicle
manufacturers insist that vehicles which are
to be used for ice control be equipped with
certain options and accessories, and it is so
stated in vehicle manufacturer specifications
for snow plow application.
WARNING:
Deployment of an air bag while using
a Meyer Spreader will not be covered under Meyer
Products’ warranty. We also recommend that, for
optimum performance, vehicles used for ice control
be equipped with:
Four-Wheel Drive
Minimum Amp Alternator or larger
Minimum Amp attery or larger ( C.C.A.)
Mud and Snow Tires
Increased Radiator Cooling
Automatic Transmission
ower rakes
ower Steering
Under the continuing Meyer Product Improvement
Plan, Meyer Products LLC reserves the right to
change design details and construction without
prior notice and without incurring any obligation.
Safety Definitions
DANGER Conveyor
This decal alerts all to the danger
of serious personal injury or death
while servicing or cleaning this
equipment without first turning off
or disconnecting all power sources.
DANGER Spinner
This decal alerts all to the danger of
any person being near the spinner
while it is turning where serious
personal injury could result if struck
by flying debris.
CAUTION
This decal cautions all to observe
general safety procedures when
operating, moving, storing, cleaning
or servicing this equipment.
CAUTION Empty Hopper
This decal cautions all to only lift or
move equipment when hopper is
empty to prevent the risk of serious
personal injury or property damage.
CAUTION Fork Length
This decal cautions all to make sure
fork lift arms extend a minimum of
( . cm) past both brackets before
lifting or moving equipment to prevent
the risk of serious personal injury or
property damage.
These safety alert decals are used to alert you of potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.