Meyer LPV 3, Руководство пользователя

Страница: 21 / 72

20
21
PV Spreader Component Identification
ELECTRIC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PV Spreader Component Identification
1. Hopper – Steel hopper holds spreading
material.
2. Forklift Brackets Allows spreader to be
lifted and moved with a forklift.
3. Body Jacks – Supports the hopper and
allows for spreader to bolted to vehicle.
4. Conveyor Floor – Creates surface for drag
chain to pickup material and move it towards
the rear discharge.
5. Chain Wiper – Cleans excess material from
drag chain.
6. Inverted Vee – Relieves weight of material
on the drag chain and is also the spreader
lifting location.
7. Top Screen – Breaks up large clumps of
material and prevents foreign objects from
entering hopper.
8. Feedgate – Regulates amount of material
being discharged from the conveyor.
9. Idler Assembly Applies tension to the
drag chain.
10. Gearbox Assembly ratio gearbo
receives power from the motor and moves
drag chain.
11. Drag Chain – Is driven by the gearbox and
moves material out of hopper to the spinner
assembly.
12. Conveyor Motor – Supplies power to
drive the conveyor.
13. Motor Cover – Covers motor to keep out
moisture and debris.
14. CHMSL Complies with Federal Motor
Vehicle Safety Standards.
15. Spinner Assembly Attaches to the rear
of the spreader and distributes the spreading
material onto road the surface.
16. Spinner Motor – Supplies power to drive
the spinner disc.
17. Spinner Disc – Rotates at a high RPM and
throws material out of the spinner assembly.
18. External Baffles Ad usts the width of the
spread pattern behind the vehicle.
ELECTRIC