Meyer LPV 3, Руководство пользователя

Страница: 25 / 72

24
25
GAS ENGINE
Polyhawk Component Identification
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
7
Polyhawk Component Identification
1. Hopper – Constructed from Polyethylene
and holds spreading material.
2. Trough – Stainless steel trough houses drag
chain and drive components, also supports
hopper.
3. Body Jacks – Supports the hopper and
trough, allows for spreader to be bolted to
vehicle.
4. Forklift Brackets Allows spreader to be
moved or installed from the rear with a forklift.
5. Conveyor Floor – Creates surface for drag
chain to pickup material and move it towards
rear discharge
6. Chain Wiper – Cleans excess material from
drag chain.
7. Inverted Vee – Relieves weight of material
on the drag chain and is also the spreader
lifting location.
8. Top Screen – Breaks up large clumps of
material and prevents foreign objects form
entering hopper.
9. Feedgate – Regulates amount of material
being discharged from conveyor.
10. Idler Assembly Applies tension to the
drag chain.
11. Gearbox ratio gearbo received
power from the motor and moves drag chain.
12. Drag Chain – Is driven by gearbox and
moves material out of hopper to the spinner
assembly.
13. Gasoline Engine – Supplies power to
drive the conveyor and spinner.
14. Engine Shroud – Covers engine to keep
out moisture and debris.
15. CHMSL Complies with the Federal Motor
Vehicle Safety Standards.
16. Spinner Assembly Attaches to rear
of spreader and distributes the spreading
material onto road surface. CA TION DO NOT
TRANS ORT S R AD R WITH S INN R IN
TH RAIS D OSTION.
17. Spinner Disc – Rotates at a high RPM and
throws material out of spinner assembly.
18. Internal Baffles Ad usts the direction of
the spread pattern behind the vehicle.
19. External Baffles Ad usts the width of the
spread pattern behind the vehicle.
GAS ENGINE