Meyer LPV 3, Руководство пользователя

Страница: 52 / 72

52
53
Adjusting spread pattern width:
1.
Gasoline engine driven spreader: Increase spread pattern width by increasing the engine speed. Decrease the spread pattern
width by decreasing the engine speed.
2. lectric driven spreader (single motor) Increase spread pattern width by increasing electric motor speed. Decrease the
spread pattern width by decreasing the electric motor speed.
3. lectric driven spreader (dual motor) Increase spread pattern width by increasing electric spinner motor speed. Decrease spread
pattern width by decreasing the electric spinner motor speed.
4. Hydraulic driven spreader Increase spread pattern width b y increasing oil flow to spinner hydraulic motor. Decrease
spread pattern width by decreasing oil flow to spinner hydraulic motor.
Operating Instructions
DESIRED SPREAD
PATTERN
BAFFLE SETTING
INTERNAL EXTERNAL
LEFT & RIGHT
LH UP LH UP
CENTER UP
RH UP RH UP
LEFT
LH UP LH UP
CENTER UP
RH DOWN RH DOWN
RIGHT
LH DOWN LH DOWN
CENTER UP
RH UP RH UP
CENTER WINDROW
LH DOWN LH DOWN
CENTER DOWN
RH DOWN RH DOWN
Adjusting the spread pattern direction:
The spread pattern direction can be regulated by adjusting
the internal and external spinner baffles on the spinner
assembly.
Adjusting the internal spinner baffles:
1.
To adjust the internal spinner baffles, pull out the baffle
handle until disengaged from the slot.
2. Rotate handle to desired setting.
3. Release handle allowing it to engage the slot.
Adjusting external spinner baffles:
1.
Remove hair pin from link bar.
2. Disengage link bar from spinner baffle.
3. Raise or lower spinner baffle to desired position.
4. Insert link bar into desired hole on spinner baffle.
5. Insert hair pin into link bar.
Operating Instructions
Left & Right Pattern
Left Spread Pattern
Right Spread Pattern
WindRow Spread Pattern