Meyer LPV 3, Руководство пользователя

Страница: 59 / 72

58
59
Electrical & Hydraulic Schematics
Plumbing schematic
for hydraulic spreaders.
Conveyor Motor
Single flow controller plumbing
Dual flow controller plumbing
Conveyor Motor
Spinner Motor
Spinner Motor
Pr
essur
e
Pr
essur
e
Retur
n
Retur
n
Maintenance
Regular maintenance is the key to your Meyer Spreader operating efficiently and trouble free. Meyer Products LLC
recommends this maintenance information for regular service. Sustained heavy operation may call for more frequent
service. Material spreading subjects a vehicle to exceptionally rugged use. As a result, it is very important to inspect
and bring the spreader and vehicle up to maximum operating conditions. Inspection should be made of both the
vehicle and spreader prior to the winter season and each use.
Pre-Season Maintenance
Scheduled vehicle maintenance should be performed as
recommended by the manufacturer.
Vehicle Maintenance
Don’t forget that in addition to keeping equipment in order:
1. Keep windshield wipers, heaters and lights working.
2. Use emergency flashing lights for increased visibility
and safety.
3. Equip vehicle with tire chains when necessary.
4. Provide operators with protective clothing and gloves
for handling ice melting chemicals.
Vehicle Electrical System
For ma imum ef ciency, the vehicle supporting the spreader
must be properly serviced. The system should consist of at
least a amp/hr battery and a amp alternator. e sure
to check regularly:
1. Battery terminals to assure they’re tight and free of
corrosion.
2. Electrical connections, to assure they’re tight and
corrosion free.
3. Battery must be in top operating condition.
4. Alternator and regulator, to assure ma imum
electrical output.
Vehicle Hydraulic System
To prevent any issues with the vehicle hydraulic system, be
sure to perform the following prior to the winter season:
1. Flush and re ll hydraulic reservoir. Replace hydraulic
oil filter.
2. Inspect hydraulic pump, motors, hoses, and couplers
for damage or leaks.
3. Refer to hydraulic pump manufacturers maintenance
recommendations.
Spreader
Prior to the start of the winter season the pre-season
maintenance should be performed to ensure the spreader
operates reliably. Follow the maintenance schedule for service
recommendations. Don’t forget to also do the following:
1. Verify spreader is securely attached to vehicle.
2. Inspect Spreader for loose, missing, or damaged parts,
guards, or hardware.
3. Repaint any rusty parts.
4. Ensure moving parts are free and not corroded.
5. Test run spreader before filling with material.