Meyer LPV 3, Руководство пользователя

Страница: 29 / 72

28
29
1
2
3
4
5
6
8
9
10
11
12
HYDRAULIC
Polyhawk Component Identification
7
13
14
15
16
17
18
19
20
Polyhawk Component Identification
1. Hopper – Constructed from Polyethylene
and holds spreading material.
2. Trough – Stainless steel trough houses
drag chain and drive components, also
supports hopper.
3. Body Jacks – Supports the hopper
and trough, allows for spreader to be bolted
to vehicle.
4. Forklift Brackets Allows spreader to be
moved or installed from the rear with a forklift.
5. Conveyor Floor – Creates surface for drag
chain to pickup material and move it towards
rear discharge.
6. Chain Wiper – Cleans excess material from
drag chain.
7. Inverted Vee – Relieves weight of material
on the drag chain and is also the spreader
lifting location.
8. Top Screen – Breaks up large clumps of
material and prevents foreign objects from
entering hopper.
9. Feedgate – Regulates amount of material
being discharged from conveyor.
10. Idler Assembly Applies tension to the
drag chain.
11. Gearbox Assembly gear reduction
receives power from engine and contains drive
shaft which moves drag chain.
12. Drag Chain – Is driven by gearbox and
moves material out of hopper to the spinner
assembly.
13. Conveyor Motor – Supplies power to
drive the conveyor.
14. Shaft Guard – Prevents access to the
gearbox input shaft.
15. CHMSL Complies with the Federal Motor
Vehicle Safety Standards.
16. Spinner Assembly Attaches to rear of
spreader and distributes the spreading material
onto road surface. CA TION DO NOT
TRANS ORT S R AD R WITH S INN R
IN TH RAIS D OSTION.
17. Spinner Motor – Supplies power to drive
the spinner.
18. Spinner Disc – Rotates at a high RPM
and throws material out of spinner assembly.
19. Internal Baffles Ad usts the direction
of the spread pattern behind the vehicle.
20. External Baffles Ad usts the width of
the spread pattern behind the vehicle.
HYDRAULIC