Metrodata ATM CBR DSU, Руководство пользователя

Страница: 43 / 128

CONFIGURING THE ATM CBR DSU
33 76-02-031E
5 . 2. 6 Output config (version4.x)
This item facilitates the outputting of config information to an intelligent terminal or PC
connected to the DSU’s terminal port and set up with a terminal emulator such as Hyperterm.
When
OUTPUT CONFIG is selected from the menu screen, the following message appears:
Figure 5.13 Output config screen response
The Hyperterm path TRANSFER / CAPTURE TEXT is selected, and when a key is pressed,
transfer of configuration data takes place into a nominated file. Note that the file is a.TXT text
file. As soon as the transfer is complete, the Hyperterm
DISCONNECT button should be
pressed to avoid capturing unwanted messages. A typical config file is shown below:
Figure 5.14 Metrodata DSU Configuration dump file
Metrodata CBR5300: local connection to “[nodename]”
Start capture then press a key
After transfer, stop capture then press another key.
e.0.c=1 e.0.f=1
e.0.t=1 e.0.b=1 e.0.j=1
e.0.o=1 e.0.xa=8652 e.0.xi=49715
e.0.xt=58367 e.0.q=65536 e.1.c=1
e.1.l=1 e.1.f=5 e.1.t=1
e.1.j=1 e.1.xa=8652 e.1.xi=49715
e.1.xt=58367 e.1.q=65536 a.0.m=-1
a.0.a=1 a.0.h=2 a.0.c=1
a.0.p=1 a.0.s=28 a.1.m=-1
a.1.a=1 a.1.h=2 a.1.c=1
a.1.s=28 v.b=3 v.w=LA1000
v.a=31 v.r=2 v.e=1
g.n=egham3k g.t=60 p.0.e=3
p.0.d=1 p.0.i=5 p.0.v=1
p.1.i=5 p.2.i=5 n.0.a=1
n.0.p=0.192.129.0.1.255 n.0.n=255.255.255.0 n.0.b=1
n.1.n=255.255.255.0 n.1.b=1 n.1.t=1
n.2.b=1 n.2.t=2 n.2.f=255.255.255.255
i.t=32 s.up=161 s.ut=162
s.sc=public s.sw=public s.st=public
s.sm=255.255.255.255 s.ts=software s.tc=config