Metcal RSS-1000-CVSI, Руководство пользователя

Страница: 286 / 396

USER MANUAL, RSS-1000-CVSI
7000-5970
Rev.
A
page
286
of
396
13.2. If unsatisfied with the either of the two points, tap
Cancel
. Deselect and reselect the Set
Fiducial Points button and repeat steps 11 & 12.
13.3. If satisfied, tap
Ok
.
14. Once fiducial points have been established, you can proceed with programming of profile.
15. After saving the profile, reopen the profile in order to register the establishment of fiducial points.
Note: The camera MUST be turned on before running the program in order for fiducial points to work
properly. In addition, the robot must be “homed” in-between each run.
Fiducial Points Establishment Complete!
PATTERN RECOGNITION
Pattern Recognition is another advanced feature within the Smart Interface System’s arsenal.
This feature greatly speeds up programming processes by allowing the user to define a pattern for
the system to search for and letting the Smart Interface System find other instances of the defined
pattern. The user can then apply the desired predefined program to each desired instance.
Please be mindful of the lighting when using pattern recognition. The objective is to maintain even
lighting throughout the working envelope. Therefore, it is good practice to keep the unit in a
stationary location in which the lighting is controlled. In addition, do not crowd around the unit or
stand in front of a light source when taking a screenshot. The simple act of hovering over the unit
while the screenshot is taken can have negative effects as this will cast a shadow over the unit.
Uneven lighting or the casting of shadows will make two of the same features appear as two separate
features to the computer vision camera, thus making one of the two patterns unrecognizable when
the function is used. See examples below:
Uneven, Focused Lighting Evenly Distributed Lighting
User
Defined
Pattern
Missed
Patterns
User
Defined
Pattern
Recognized
Patterns