Metcal RSS-1000-CVSI, Руководство пользователя

Страница: 158 / 396

USER MANUAL, RSS-1000-CVSI
7000-5970
Rev.
A
page
158
of
396
4.4.10. Cancel
4.4.10.1. Aborts the parameter edit and prevents any changes from being made.
5. Once the desired values have been entered, tap the Save Button to save all changes.
6. Tap to enter the desired Solder Wire Feeder settings
6.1. Details on the setting covered in Feeding Solder Section
7. Jog to the location of the point in the desired orientation.
8. Tap the Record button .
8.1. A pink dot will appear on the screen to signify that a point has been recorded.
Programming a Point Complete!
SOLDER LINE
Note: When programming a solder line, the settings for the solder wire feeder will slightly change.
The solder feeder feed rate will dictate the amount of solder that is dispensed for the programmed
line instead of a fixed length. The higher the speed, the greater the volume of solder that is
dispensed. When programming a speed, one should consider the tip geometry, size, and tip
temperature series. For example, a 2.5mm, 700 series, chisel tip should not be programmed faster
than 3 mm/s.
1. Tap on the Waypoint button twice to toggle to Solder Line.
x2