Metcal RSS-1000-CVSI, Руководство пользователя

Страница: 192 / 396

USER MANUAL, RSS-1000-CVSI
7000-5970
Rev.
A
page
192
of
396
Editing Coordinates Using Offset All Function
The Offset All function is a very useful tool for mass editing. This feature will offset all points
within a previously created profile with respect to any point within a profile. This is similar to the offset
feature within the main screen of the software, with the exception that this offset can be saved as a
new profile for use later. The Offset All function can be used for changes in fixture locations, changes
in fixture heights, among other applications.
Please note that when using the Offset All function, ALL coordinates that have changed from the
original program will be relatively adjusted to every point within the program. This can especially be
problematic when there are multiple orientations or heights within a program. For example, say a
given program included half of the programmed points at an orientation of 0° and the other half at
180°. If a 45° rotation was used during the offset, the values of the new coordinates would then be
changed to 45° and 225° respectively. Please take careful consideration when using the Offset All
function and choosing which values to offset.
Complete the following steps to successfully edit coordinates using the Offset All function.
1. Install the appropriate PCBA and fixture associated with the profile under edit.
2. Choose a feature within the profile as the point of reference.
2.1. In this example, the fixture was moved to the bottom right of the working envelope. Therefore,
the solder line will be chosen as the reference feature as it is the furthest most feature in the Y
and in the X Axes.