Metcal RSS-1000-CVSI, Руководство пользователя

Страница: 27 / 396

USER MANUAL, RSS-1000-CVSI
7000-5970
Rev.
A
page
27
of
396
Description of Functions
Function Permissions Description
The Create New Profile function allows the user to create a brand-new
profile. Once this function is activated, the workspace will be cleared of
any unsaved work.
The Edit Profile function allows the operator to modify any existing
profile or the current profile that is being created. Adjustments in the X,
Y, Z, and Theta axes are available. This function allows the user to
edit other parameters such as speed, retract height, and solder feeder
parameters. More details provided in the System Operation section.
The Open Profile function allows the user to open any previously
created profile, either from the on-board memory or from an external
memory device.
The Save Profile function saves all programmed parameters. This
includes all point to point and line soldering commands within the
workspace, solder feeder parameters, desired cleaning profile, go-to
positions, etc.
The Run Profile function will start the profile active in the workspace.
This can be a profile saved on the onboard memory, profile from an
external memory device, or an unsaved work in progress profile.
At any point in time, the user may hit the pause button to stop all robot
movement and maintain its position. Upon clicking the pause button,
the icon will change to the play button again, to be pressed to resume
operation.
The Stop Profile function immediately stops the active profile and
sends the unit back to the home position.
The Global Settings function gives users access to system settings,
camera settings, software updates and debugging support. More
details provided in the System Operation section.
The Eject USB function must be activated to safely remove any
external device. Use of this button aids in the prevention of data loss
or corruption when removing devices.
The E-Stop function is a virtual option of an emergency stop to halt the
unit in its entirety. Unlike the Stop Profile function, the unit will freeze
entirely to allow for the removal of any obstructions or to prevent any
damage to the unit or workpiece. A pop-up will appear noting that the
E-Stop has been activated. This pop-up must be disabled before the
unit returns home.