Metasys IFC-1010, Раздел программирования технического руководства

Страница: 60 / 104

60 Programming—IFC-1010/2020 Programming
8 = HIS
Select history
submenu Option 1-3.
2 = STOP
(stops the recording of events
into the history buffer)
3 = CLEAR
(clears out selected
number
of oldest events from
history buffer)
Enter number of
events to be cleared.
(Exit Program
Mode)
hisbuffc.cdr
1 =START
(starts the recording of
events into the history)
Figure 50: History Buffer Option Flowchart
After selecting Option 8 from the Main Programming menu, the History
Mode Programming submenu appears:
PRESS 1=START,2=STOP,3=CLEAR :
The History Mode Programming submenu has the three options described
below:
Prog
*
8
!
1
????
Level 2 Password
sec181a.cdr
Figure 51: Key Sequence to Access Option 1 (Start)
This option allows the programmer to start storing events into the panel’s
History mode buffer. The following example enables History mode:
PRESS 1=START,2=STOP,3=CLEAR : 1
Prog
*
8
@
2
????
Level 2 Password
sec182a.cdr
Figure 52: Key Sequence to Access Option 2 (Stop)
1=START
2=STOP