Meridian Link/Customer Controlled Routing, Руководство по установке и обновлению

Страница: 369 / 595

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 351
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Creating a Phantom Set
After configuring the phantom loop, an AST Meridian 1 proprietary set can
be designated to a specific device group which can be controlled by
applications. Therefore, when an application wants to originate a call on
behalf of an idle TN, it can use a phantom TN. This idle TN is an AST
Meridian 1 proprietary set which is defined on a phantom loop. There is no
upper limit on the number of devices per group defined by a Phantom DN.
The upper limit is the limit of the number of TNs that can be defined for the
loop card. This number is dependent on the density of the loop card. The
ITNA and DGRP prompts need to be configured as shown in Table 133.
Note: A phantom set cannot be created for an ACD agent.
Table 133
LD 10ÑCreating a Phantom Set
Prompt Response Comment
REQ NEW New
TYPE aaaa Telephone type, where:
aaaa = SL1, 2006, 2008, 2009,
2016, 2018, 2112, 2216, 2317,
2616, or 3000.
TN l s c u
c u Terminal number
Terminal number for the Option 11
¥
¥
¥ Press [Return] until the CDEN
prompt appears.
CDEN SD, DD, 4D Card density
SD = Single density
DD = Double density
4D = Quad density
DES phanDN One-to-six character Office Data
Administration System (ODAS)
Station Designator
Ñ continued Ñ