Meridian Link/Customer Controlled Routing, Руководство по установке и обновлению

Страница: 351 / 595

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 333
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Define status message groups
Use LD 15 to define the status message groups.
Table 122
LD 15ÑDefine status message groups
Prompt Response Comment
REQ CHG Create or change data in the database
TYPE AML_DATA or
CDB Customer data block.
X11 Release 22: Enter AML_DATA.
X11 Release 21 and prior: Enter CDB.
CUST 0Ð99 Customer number
¥
¥ Press [Return] until the VSID prompt
appears
VSID 0Ð15 Value Added Server Identifier ID. This
must be identical to the VSID defined in
LD17.
Examples are
GRP2
GRP3
GRP4
GRP5
GRP6
GRP7
GRP8
GRP9
GRP10
GRP11
GRP12
GRP13
GRP14
GRP15 1 2 3 6
1 3 5 6
1 2 3 4 5 6
2 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6 Assign status events 1, 2, 3, 4, 5, 6, 7, 8,
9, 10, 11, 12, 13, 14 to groups 2 to 15,
where
1 = on-hook, 2 = off-hook,
3 = ringing, 4 = active,
5 = set disconnected, 6 = unringing
7 = retrieve (X11 Release 21),
8 = ID change, 9 = transfer completed to,
10 = conference completed to
11 = conference to simple
12 = hold, 13 = transfer initiation,
14 = conference initiation
Note: Status events 8 through 14 are
available only for X11 Release 22 and
later, with Meridian Link 5 and later.
ÑcontinuedÑ