manualshive.com logo in svg

MerCruiser Axius 350, Инструкция по эксплуатации

MerCruiser Axius 350 - инструкция по эксплуатации бесплатно для скачивания с manualshive.com. Узнайте все о возможностях и функциях вашего привода MerCruiser Axius 350, следуя данным в руководстве. Не упустите возможность скачать свой экземпляр сейчас!

Поделиться
Скачать
background image

Section 1 - Warranty 

Page  14

90-8M0053363   

eng

  NOVEMBER  2010

Mercury Installation Quality Certification Program

15502

Mercury MerCruiser products installed by a Mercury Installation Quality Certified Manufacturer are Installation Quality certified

products and may receive an additional one (1) year of limited warranty coverage.
The Installation Quality Certification program was developed to recognize MerCruiser boatbuilder customers who have achieved

higher manufacturing standards. It is the first and only comprehensive manufacturer‑installation certification program in the

industry.
The program has three goals:
1. To enhance overall product quality.
2. To improve the boat ownership experience.
3. To enhance overall customer satisfaction.
The certification process is designed to review all facets of manufacturing and engine installation. The program is composed of

design, manufacturing and installation review stages with which builders must comply. Certification applies leading‑edge

methodologies to create:
•

Efficiencies and best practices specific to engine installation.

•

World‑class assembly and component specifications.

•

Efficient installation processes.

•

Industry standard end‑of‑line test procedures

Boat builders that successfully complete the program and meet all certification requirements earn Installation Quality System

Certified Manufacturer status and receive an additional one (1) year of Mercury limited factory warranty coverage on all

MerCruiser‑powered boats that are registered on and after the boat builder's certification date for all worldwide registrations.
Mercury has designated a section of our Website to promote the Installation Quality Certification Program and communicate its

benefits to consumers. For a current list of MerCruiser‑powered boat brands that have earned Installation Quality Certification,

visit 

www.mercurymarine.com/mercruiser_warranty.

California Emissions Limited Warranty

NOTE: Mercury Marine does not establish model years for the Mercury MerCruiser product line. In order to comply with CARB

warranty regulations, and for that limited purpose only, model year shall have the same meaning as calendar year. As an example,

2003 model year products refers to products manufactured during calendar year 2003.

The California Air Resources Board has promulgated air emissions regulations for inboard and sterndrive engines. The regulations

apply to all inboard and sterndrive engines that were manufactured for the 2003 model year and later. Mercury Marine, in

compliance with those regulations, provides this limited warranty for the emission control systems (see the components of the

emission control system listed following), and further warrants that the inboard or sterndrive engine was designed, built, and

equipped to conform with all applicable regulations adopted by the California Air Resources Board pursuant to its authority in

Chapters 1 and 2, Part 5, Division 26 of the Health and Safety Code. For information regarding the limited warranty for the

non‑emissions related components of the inboard or sterndrive engine, please see the limited warranty statement for your engine.

Содержание Axius 350






















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Axius 350

Eaton Vickers M2-200 Series Overhaul Manual preview
Vickers M2-200 Series
Бренд: Eaton Страницы: 13
Motolux 802322012 Programming Instructions preview
802322012
Бренд: Motolux Страницы: 2
Man D2842 LE103 Operating Instructions Manual preview
D2842 LE103
Бренд: Man Страницы: 90
Fireye NEXUS NX50-1 Installation Manual preview
NEXUS NX50-1
Бренд: Fireye Страницы: 8
dunkermotoren BG 65x25 MI Instruction Manual preview
BG 65x25 MI
Бренд: dunkermotoren Страницы: 30
Bison 160F Owner'S Manual preview
160F
Бренд: Bison Страницы: 19
Winterthur Gas X40-B Maintenance Manual preview
X40-B
Бренд: Winterthur Gas Страницы: 495
NSK Primado 2 Operation Manual preview
Primado 2
Бренд: NSK Страницы: 33
Robin America EX13 Service Manual preview
EX13
Бренд: Robin America Страницы: 88
Yanmar 3JH5E Operation Manual preview
3JH5E
Бренд: Yanmar Страницы: 168
GEIGER SOLIDline GU45 Series Original Assembly And Operating Instructions preview
SOLIDline GU45 Series
Бренд: GEIGER Страницы: 12
Era Inn E ACTION SI 332 AC Quick Manual preview
E ACTION SI 332 AC
Бренд: Era Inn Страницы: 2
DANA 4360-47 Parts List preview
4360-47
Бренд: DANA Страницы: 3
Briggs & Stratton 12V800 Series Illustrated Parts List preview
12V800 Series
Бренд: Briggs & Stratton Страницы: 12
Roto 130 FSI Operating Instructions Manual preview
130 FSI
Бренд: Roto Страницы: 9
Wood-mizer LT35 Safety, Setup, Operation & Maintenance Manual preview
LT35
Бренд: Wood-mizer Страницы: 134
Spectrum 3.0L GM Parts & Service Manual preview
3.0L GM
Бренд: Spectrum Страницы: 327
Ford M-6007-XEFMS Manual preview
M-6007-XEFMS
Бренд: Ford Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды