Mercedes-Benz G-Class 2016, Руководство пользователя

Страница: 50 / 261

"Suitability of the seats for attaching an ISOFIX
child restraint system".
Semi-universal child restraint systems are indi-
cated by the text "semi-universal" on the
approval label. These can be used if the vehicle
and the seat are listed in the child restraint sys-
tem manufacturer's vehicle model list. For more
information, contact the child restraint system
manufacturer or visit their website.
Child restraint system on the front-
passenger seat – if it is absolutely necessary to
secure a child in a child restraint system on the
front-passenger seat:
X
Always pay attention to the instructions under
"Child restraint system on the front-
passenger seat" (
Y
page 43).
There you will find instructions on how to cor-
rectly route the shoulder belt strap from the
belt sash guide to the shoulder belt guide on
the child restraint system (
Y
page 45).
X
Move the front-passenger seat as far back as
possible and into the lowest position.
X
Move the backrest to an almost vertical posi-
tion.
The entire base of the child restraint system
must always rest on the seat cushion of the
front-passenger seat. The backrest of a
forward-facing child restraint system must, as
far as possible, rest flat against the backrest
of the front-passenger seat. The child
restraint system must not touch the roof or be
put under strain by the head restraint. Adjust
the angle of the seat backrest and the head
restraint position accordingly. Also observe
the child restraint system manufacturer's
installation instructions.
Suitability of the seats for attaching belt-secured child restraint systems
If you use a baby car seat of category 0 or 0+ or a rearward-facing child restraint system of category
I on a rear seat, you must adjust the driver's or front-passenger seat so that the seat does not touch
the child restraint system.
If you use a category I, forward-facing child restraint system, you should remove the head restraint
from the respective seat, if possible (
Y
page 70). The backrest of the child restraint system must,
as far as possible, lie flat against the backrest of the seat.
Make sure that the child's feet do not touch the front seat. If necessary, move the front seat forward
slightly.
For certain child restraint systems in weight categories II or III, this can mean that the area of use
is restricted. The maximum size setting of the child restraint system may not be possible due to
possible contact with the roof.
Always observe the notes in the "Child restraint system" section (
Y
page 40) and the child restraint
system manufacturer's installation instructions.
When you remove the child restraint system, you must replace the head restraints again immedi-
ately (
Y
page 70). All vehicle occupants must adjust their head restraints correctly before begin-
ning the journey.
Legend for the table:
X Seat that is unsuitable for children in this weight category.
U Suitable for child restraint systems in the "Universal" category that are approved for use in this
weight category.
L Suitable for child restraint systems as recommended; see the "Recommended child restraint
systems" table (
Y
page 49).
Children in the vehicle
47
Saf
ety
Z