R
If the
Rectify tyre pressure
Rectify tyre pressure
message
appears in the multifunction display, the tyre
pressure in at least one tyre is too low. The
tyre pressure must be corrected when the
opportunity arises.
R
If the
Check
Check tyre(s)
tyre(s)
message appears in the
multifunction display, the tyre pressure in at
least one tyre has dropped significantly. The
tyres must be checked.
R
If the
Warning tyre defect
Warning tyre defect
message
appears in the multifunction display, the tyre
pressure in at least one tyre has dropped sud-
denly. The tyres must be checked.
Observe the instructions and safety notes in the
display messages in the "Tyres" section
(
Y
page 150).
If the position of the wheels on the vehicle is
changed, the tyre pressures may be displayed in
the wrong positions for a short time. After a few
minutes of driving, this is rectified and the tyre
pressures are displayed in the correct positions.
Restarting the tyre pressure monitor
When you restart the tyre pressure monitor, all
existing warning messages are deleted and the
h
warning lamp goes out. The monitor uses
the currently set tyre pressures as the reference
values for monitoring. In most cases, the tyre
pressure monitor will automatically detect the
new reference values after you have changed
the tyre pressure. However, you can also set
reference values manually as described here.
The tyre pressure monitor then monitors the
new tyre pressure values.
X
Use the table on the inside of the fuel filler flap
to ensure that the tyre pressure is set cor-
rectly in all four tyres for the current operating
conditions.
Observe the notes on tyre pressure
(
Y
page 238).
X
Make sure that the key is in position 2 in the
ignition lock.
X
Press the
=
or
;
button on the steering
wheel to select the
Serv.
Serv.
menu.
X
Press the
9
or
:
button to select
Tyre pressure
Tyre pressure
.
X
Press the
a
button.
The multifunction display shows the current
tyre pressure for each tyre or the
Tyre
Tyre pres‐
pres‐
sures
sures will
will be
be displayed
displayed after a
after a few
few
minutes of driving
minutes of driving
message appears.
X
Press the
:
button.
The
Use
Use current
current pressures
pressures as
as new
new ref‐
ref‐
erence
erence values
values
message appears in the mul-
tifunction display.
If you wish to confirm the restart:
X
Press the
a
button.
The
Tyre
Tyre press.
press. monitor
monitor restarted
restarted
mes-
sage appears in the multifunction display.
After you have driven for a few minutes, the
system checks whether the current tyre pres-
sures are within the specified range. The new
tyre pressures are then accepted as refer-
ence values and monitored.
If you wish to cancel the restart:
X
Press the
%
button.
The tyre pressure values stored at the last
restart will continue to be monitored.
Radio type approval for the tyre pres-
sure monitor
country
Radio type approval number
Argentina Schrader GG4
Numero de Registro CNC:
H-12338
Brazil
see below
Abu
Dhabi,
Dubai,
United
Arab Emi-
rates
TRA
REGISTERED NO:
ER0099792/12.
DEALER NO: DA0047074/10
European
Union
Hereby, Schrader Electronics
Ltd., declares that this TPMS is in
compliance with the essential
requirements and other provi-
sions of directive 1999/5/EC.
The declaration of conformity
may be consulted at emcteam@
schrader.co.uk
Tyre pressure
241
Whee
ls
and
tyres
Z
Содержание G-Class 2016
