Mercedes-Benz G-Class 2016, Руководство пользователя

Страница: 128 / 261

R
the automatic transmission is in selector
lever position i
R
you are not driving faster than 70 km/h
You could otherwise damage the transfer
case.
X
Press button ; .
Once the shifting procedure has been com-
pleted, the HIGH HIGH RANGE RANGE transfer case position
is shown in the multifunction display.
Indicator lamp : goes out.
If the shifting procedure is unsuccessful, the
multifunction display may show the following
messages:
R
TC shift conditions not fulfilled TC shift conditions not fulfilled
One or more shift conditions has not been
met.
R
TC neutral on TC neutral on
The transfer case has cancelled the shifting
procedure and is in position N.
R
TC shift cancelled TC shift cancelled
The transfer case has cancelled the gear
change process.
X
Repeat the gear change process.
Make sure all conditions for gear changing are
met.
R
TC malfunction Visit workshop TC malfunction Visit workshop
The transfer case is faulty.
X
Do not shift the transfer case.
X
Have the vehicle checked as soon as possible
at a qualified specialist workshop.
Shifting to neutral
G
WARNING
If you do not wait for the transfer case gear
change process to complete, the transfer
case could remain in the neutral position. The
power transmission to the driven wheels is
then interrupted. There is a danger of the
vehicle rolling away unintentionally. There is a
risk of an accident.
Wait until the transfer case shift process is
completed.
X
Turn the key to position 2 in the ignition lock.
X
Apply the parking brake.
X
Depress the brake pedal.
X
Shift the automatic transmission to position
N.
X
Press and hold LOW RANGE button ; for
approximately ten seconds.
When the shift procedure is complete, the
multifunction display shows the TC TC Neutral Neutral
on on message for five seconds.
If the shifting procedure is unsuccessful, the
multifunction display may show the following
messages (
Y
page 149).
If the transfer case is in Neutral, the key is in the
ignition lock and you open the driver's door, the
TC Neutral on TC Neutral on message appears in the multi-
function display. If you then release the parking
brake, a warning tone will sound.
Differential locks
General notes
G
WARNING
When the differential locks are engaged, ABS,
4ETS, ESP
®
and BAS are deactivated. This
could cause the wheels to lock and increases
the braking distance. There is a risk of an
accident.
Disengage the differential locks immediately
on firm surfaces with good grip.
!
To prevent damage to the transfer case, you
may only operate the vehicle on a roller dyna-
mometer (single-axle roller dynamometer) if:
R
the axle that is not being driven is raised.
or
R
the corresponding propeller shaft is dis-
connected and the transfer case differen-
tial lock is engaged.
Otherwise, the transfer case can be damaged.
Differential locks improve the traction of the
vehicle.
Your vehicle is equipped with a differential lock
each for:
R
the transfer case: this controls the balance
between the front and rear axles
R
the rear axle: this controls the balance
between the wheels on the rear axle
R
the front axle: this controls the balance
between the wheels on the front axle
Off-road driving systems
125
Driving
and
parking
Z