Mercedes-Benz G-Class 2016, Руководство пользователя

Страница: 100 / 261

and release it as soon as the engine is run-
ning.
You can start the engine without preglow if the
engine is warm.
You can also use the touch-start function. To do
this, turn the key to position 3 (
Y
page 96) and
release it immediately. The engine then starts
automatically.
Pulling away
General notes
G
WARNING
If the engine speed is above the idling speed
and you engage transmission position D or R,
the vehicle could pull away suddenly. There is
a risk of an accident.
When engaging transmission position D or R,
always firmly depress the brake pedal and do
not simultaneously accelerate.
!
If a warning tone sounds and the Release Release
park. brake park. brake message appears in the multi-
function display, the parking brake is still
applied. Release the parking brake.
Depress the accelerator carefully when pulling
away.
You can open the doors from the inside at any
time.
You can also deactivate the automatic locking
feature (
Y
page 139).
It is possible to shift the transmission from posi-
tion j to the desired position only if you
depress the brake pedal. Only then is the selec-
tor lever lock released.
i
Upshifts take place at higher engine speeds
after a cold start. This helps the catalytic con-
verter to reach its operating temperature
more quickly.
Pulling away with a trailer
To ensure that you do not roll backwards when
pulling away on an uphill slope, apply the park-
ing brake.
X
Depress the brake pedal and keep it
depressed.
X
Shift the automatic transmission to position
h or k .
i
Always wait until the shifting process is
complete before driving off.
X
Release the parking brake (
Y
page 114).
X
Release the brake pedal.
X
Carefully depress the accelerator pedal.
ECO start/stop function
Important safety notes
G
WARNING
If the engine is switched off automatically and
you exit the vehicle, the engine is restarted
automatically. The vehicle may begin moving.
There is a risk of accident and injury.
If you wish to exit the vehicle, always turn off
the ignition and secure the vehicle against
rolling away.
General notes
The ECO start/stop function switches the
engine off automatically if the vehicle stops
moving.
When the vehicle pulls away again, the engine
starts automatically. The ECO start/stop func-
tion thereby helps you to reduce the fuel con-
sumption and emissions of your vehicle.
The ECO start/stop function is activated each
time the engine is switched on.
The ECO start/stop function is only available in
drive program E.
The system is operational if all conditions for
automatic engine switch-off have been fulfilled
(
Y
page 98) and the è ECO symbol is
shown in green in the multifunction display.
If the conditions for automatic engine switch-off
(
Y
page 98) are not all fulfilled, the è ECO
symbol is shown in yellow in the multifunction
display.
If the ECO start/stop function has been man-
ually deactivated (
Y
page 98) or a malfunction
has caused the system to be deactivated, the
è ECO symbol is not displayed.
Driving
97
Driving
and
parking
Z