Mercedes-Benz G-Class 2016, Руководство пользователя

Страница: 247 / 261

X
Stop the vehicle on solid, non-slippery and
level ground.
X
Apply the parking brake.
X
Move the front wheels to the straight-ahead
position.
X
Shift the automatic transmission to position
P.
X
Switch off the engine.
X
If a trailer is coupled to the vehicle, uncouple
it.
X
Remove the vehicle tools and jack from the
vehicle (
Y
page 223).
X
Remove the spare wheel from the spare wheel
bracket (
Y
page 223).
X
Secure the vehicle against rolling away.
Securing the vehicle against rolling
away
X
Place chocks or other suitable items under
the front and rear of the wheel that is diago-
nally opposite the wheel you wish to change.
Raising the vehicle
G
WARNING
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip over with the vehicle raised.
There is a risk of injury.
Only position the jack at the appropriate jack-
ing point of the vehicle. The base of the jack
must be positioned vertically, directly under
the jacking point of the vehicle.
!
Only position the jack at the appropriate
jacking point of the vehicle. Otherwise, you
could damage the vehicle.
Observe the following when raising the vehi-
cle:
R
Use only the vehicle-specific jack that has
been tested and approved by Mercedes-Benz
to raise the vehicle. If the jack is used incor-
rectly, it could tip over while the vehicle is
raised.
R
The jack is designed only to raise the vehicle
for a short time while a wheel is being
changed. It is not permissible to use it to per-
form maintenance work under the vehicle.
R
Avoid changing the wheel on uphill and down-
hill slopes.
R
Before raising the vehicle, secure it against
rolling away by applying the parking brake and
positioning wheel chocks. Do not release the
parking brake while the vehicle is raised.
R
The jack must be placed on a firm, flat and
non-slip surface. On a loose surface, a large,
flat load-bearing underlay must be used. On a
slippery surface, a non-slip underlay must be
used, e.g. use a rubber mat on tiles.
R
Do not use wooden blocks or similar objects
as a jack underlay. Otherwise, the jack will not
be able to achieve its load-bearing capacity
due to the restricted height.
R
Ensure that the distance between the under-
side of the tyre and the ground does not
exceed 3 cm.
R
Do not place your hands or feet under the
raised vehicle.
R
Do not lie under the raised vehicle.
R
Do not start the engine when the vehicle is
raised.
R
Do not open or close a door when the vehicle
is raised.
R
Ensure that no persons are present in the
vehicle when raising the vehicle.
X
Using wheel wrench : , loosen the bolts on
the wheel you wish to change by about one
full turn. Do not unscrew the bolts completely.
244
Changing a wheel
Whe
els
and
tyres