Mercedes-Benz B 250 e 2015, Руководство пользователя

Страница: 61 / 293

Vehicles with the Style or Urban package or 4-way or 6-way front seats: set the front seat to the
highest position.
Vehicles with 2-way front seats: set the front seat to the foremost position.
Suitability of the seats for attaching an i-Size child restraint system
If you use a baby car seat of category 0 or 0+ or a rearward-facing child restraint system of category
I on a rear seat, you must adjust the driver's or front-passenger seat so that the seat does not touch
the child restraint system.
If you use a category I, forward-facing child restraint system, you should remove the head restraint
of the respective seat (
Y
page 90), if possible. The backrest of the child restraint system must, as
far as possible, lie flat against the backrest of the seat.
Always observe the notes in the "Child restraint system" section (
Y
page 49) and the child restraint
system manufacturer's installation instructions.
When you remove the child restraint system you must replace the head restraints again immediately
(
Y
page 89). All vehicle occupants must adjust their head restraints correctly before beginning the
journey.
Legend for the table:
X Seat which is unsuitable for i-Size child restraint systems in the "Universal" category.
i ‑ U Suitable for a forward or rearward-facing i-Size child restraint system in the "Universal" cate-
gory.
Seat
Front-
passenger
seat
Rear seat
Left Centre Right
i ‑ Size child restraint sys-
tems
X i ‑ U X i ‑ U
Recommended child restraint systems
General notes
Always observe the information in "Child restraint systems on the front-passenger seat" (
Y
page 52)
and in "Suitable positioning of the child restraint system" (
Y
page 54).
You can obtain further information about the correct child restraint system from any Mercedes-Benz
Service Centre.
58
Children in the vehicle
Saf
ety