Mercedes-Benz B 250 e 2015, Руководство пользователя

Страница: 54 / 293

This symbol indicates an ISOFIX position which
is suitable for attaching an ISOFIX child restraint
system. A similar symbol can be found on the
ISOFIX child restraint system.
This symbol indicates an i ‑ Size position which is
suitable for attaching an i-Size child restraint
system. A similar symbol can be found on the i-
Size child restraint system.
!
When fitting the child restraint system,
make sure that the seat belt for the centre
seat does not get trapped. Otherwise, the
seat belt could be damaged.
: ISOFIX securing rings
;
i-Size securing rings
X
Install the ISOFIX child restraint system on
both ISOFIX securing rings : or i-Size secur-
ing rings ; .
or
X
Install the i-Size child restraint system on both
i-Size securing rings ; .
ISOFIX and i-Size are standardised securing sys-
tems for special child restraint systems. ISOFIX
child restraint systems are approved in accord-
ance with ECE R-44. i-Size child restraint sys-
tems are approved in accordance with ECE
R-129.
Only child restraint systems that have been
approved in accordance with ECE R-44 may be
attached to ISOFIX securing rings. i-Size child
restraint systems that have been approved in
accordance with ECE R-44 and ECE R-129 may
be attached to i-Size securing rings. ISOFIX
securing ring : or i-Size securing ring ; are
installed on the left and right sides of the rear
seats.
Top Tether
Introduction
Top Tether provides an additional connection
between the child restraint system secured with
ISOFIX and the vehicle. It helps reduce the risk
of injury even further. If the child restraint sys-
tem is fitted with a Top Tether belt, this should
always be used.
Important safety notes
G
WARNING
If the rear seat backrests are not locked, they
could fold forwards in the event of an acci-
Children in the vehicle
51
Safety
Z