Suitability of the seats for attaching ISOFIX child restraint systems
If you use a baby car seat of category 0 or 0+ or a rearward-facing child restraint system of category
I on a rear seat, you must adjust the driver's or front-passenger seat so that the seat does not touch
the child restraint system.
If you use a category I, forward-facing child restraint system, you should remove the head restraint
of the respective seat (
Y
page 90), if possible. The backrest of the child restraint system must, as
far as possible, lie flat against the backrest of the seat.
Always observe the notes in the "Child restraint system" section (
Y
page 49) and the child restraint
system manufacturer's installation instructions.
When you remove the child restraint system you must replace the head restraints again immediately
(
Y
page 89). All vehicle occupants must adjust their head restraints correctly before beginning the
journey.
Legend for the table:
X
ISOFIX position that is not suitable for ISOFIX child restraint systems in this weight category
and/or size category.
IUF Suitable for forward-facing ISOFIX child seat securing systems that belong to the "Universal"
category which are approved for use in this weight category.
IL Suitable for ISOFIX child restraint systems as recommended; see the "Recommended child
restraint systems" table (
Y
page 58).
The manufacturer will also recommend a suitable ISOFIX child restraint system. For this, your
vehicle and the seat must be listed in the child restraint system manufacturer's model list. For
more information, contact the child restraint system manufacturer or visit their website.
Weight category
Size category
Equipment
Rear seat left,
right
Carry-cot
F
ISO/L1
X
G
ISO/L2
X
0
up to 10 kg
up to approximately 6 months
E
ISO/R1
IL
0+
up to 13 kg
up to approximately 15 months
E
ISO/R1
IL
D
ISO/R2
IL
C
ISO/R3
IL
3
I
9 kg to 18 kg
between approximately 9 months
and 4 years
D
ISO/R2
IL
C
ISO/R3
IL
3
B
ISO/F2
IUF
B1
ISO/F2X
IUF
A
ISO/F3
IUF
The child restraint system must not touch the roof or be put under strain by the head restraints.
Adjust the head restraint position accordingly. Also observe the child restraint system manufac-
turer's installation instructions.
3
If you are using a child restraint system of size category C (ISO/R3), make sure that the front seat backrest
does not rest against the child restraint system.
Children in the vehicle
57
Safe
ty
Z
Содержание B 250 e 2015
