Mercedes-Benz B 250 e 2015, Руководство пользователя

Страница: 118 / 293

Control panel for THERMOTRONIC automatic climate control (2-zone)
:
To set the temperature, left (
Y
page 117)
; To set climate control to automatic mode (
Y
page 117)
=
To demist the windscreen (
Y
page 118)
? To increase the airflow (
Y
page 118)
A
To set the air distribution (
Y
page 117)
B Display
C
To activate/deactivate air-recirculation mode (
Y
page 120)
D
To switch climate control on/off (
Y
page 116)
E To set the temperature, right (
Y
page 117)
F
To activate/deactivate the residual heat function (
Y
page 122)
G To activate/deactivate cooling with air dehumidification (
Y
page 116)
H
To reduce the airflow (
Y
page 118)
I To switch the rear window heating on/off (
Y
page 119)
J
To switch the ZONE function on/off (
Y
page 118)
Information on using THERMOTRONIC
automatic climate control
Automatic climate control
The following contains instructions and recom-
mendations to enable you to get the most out of
your THERMOTRONIC automatic climate con-
trol.
R
Activate climate control using the à and
¿ buttons. The indicator lamps in the
à and ¿ buttons light up.
R
Set the temperature to 22 †.
R
Only use the "Windscreen demisting" function
briefly until the windscreen is clear again.
R
Only use air-recirculation mode briefly, e.g. if
there are unpleasant outside odours or when
in a tunnel. The windows could otherwise mist
up as no fresh air is drawn into the vehicle in
air-recirculation mode.
R
Use the ZONE function to adopt the temper-
ature settings on the driver's side for the
front-passenger side as well. The indicator
lamp in the á button goes out.
R
Use the residual heat function if you want to
briefly heat or ventilate the vehicle interior
when the ignition is switched off. The residual
heat function can only be activated or deac-
tivated with the ignition switched off.
R
If you change the settings of the climate con-
trol system, the climate status display
Overview of climate control systems
115
Clima
te
contr
ol