Mercedes-Benz B 250 e 2015, Руководство пользователя

Страница: 144 / 293

If, after the charging process, the charging cable
is:
R
left connected to the power socket, the cur-
rently selected values will be used for the next
charging process.
R
removed from the power socket, the values
will be reset to the minimum setting for the
next charging process. You may then need to
reset the values of the maximum charge cur-
rent.
If the charge current values that have been set
on the charging cable and the on-board com-
puter are different, the high-voltage battery is
charged using the lower value.
If the vehicle requires more time than usual to
charge the high-voltage battery, check:
R
the settings of the maximum charge current
on the controls of the charging cable
R
the settings of the maximum charge current in
the menu of the on-board computer
Indicator lamps on the vehicle socket
When the indicator lamps on the vehicle socket
light up, this means the following:
Left indicator lamp Ì Ì
Lights up The charging cable can be
connected or removed.
Flashes The charging cable connector
has been connected incor-
rectly.
Right indicator lamp Ý Ý
Flashes
slowly in
orange
The connection between the
vehicle and the current
source is being established
before charging begins.
Flashes
slowly in
green
The high-voltage battery is
charging.
Lights up
green
The high-voltage battery is
fully charged.
Flashes rap-
idly in red
A malfunction has occurred
while charging.
Connecting the charging cable
: To open the charge socket flap
;
Tyre pressure table
= Socket cap
?
Reference sticker (voltage range)
A Left indicator lamp Ì
B
Right indicator lamp Ý
C Vehicle socket
D
Warning sticker (charging cable)
X
Shift the DIRECT SELECT lever to position P.
X
Switch the ignition off.
X
Press the charge socket flap in the direction
of arrow : .
The charge socket flap swings up.
X
Remove socket cap = from vehicle socket
C .
X
Insert the mains plug into the mains socket to
the stop.
X
Insert the charging cable connector into vehi-
cle socket C to the stop.
The high-voltage battery is charging.
The Ý right indicator lamp B on vehicle
socket C flashes green.
The vehicle must not be moved while the charg-
ing cable is connected or during charging.
High-voltage battery
141
Driving
and
parking
Z