X
Press
a
to confirm.
X
Press the
:
or
9
button to select the
Daytime driving lights
Daytime driving lights
function.
If the
Daytime
Daytime driving
driving lights
lights
function has
been switched on, the cone of light and the
W
symbol in the multifunction display are
shown in orange.
X
Press the
a
button to save the setting.
Further information on daytime driving lights
(
Y
page 98).
Switching the Intelligent Light System
on/off
X
Press the
=
or
;
button on the steering
wheel to select the
Settings
Settings
menu.
X
Press the
:
or
9
button to select the
Lights
Lights
submenu.
X
Press
a
to confirm.
X
Press the
:
or
9
button to select the
Intell. Light System
Intell. Light System
function.
If the
Intell. Light Sys.
Intell. Light Sys.
function has
been switched on, the cone of light and the
L
symbol in the multifunction display are
shown in orange.
X
Press the
a
button to save the setting.
When you switch
Intell.
Intell. Light
Light System
System
func-
tion on, you activate the following functions:
R
Motorway mode
R
Active light function
R
Cornering light function
R
Extended range foglamps
If you set the dipped-beam headlamps for driv-
ing on the right/left, the multifunction display
shows the
Intell. Light System: system
Intell. Light System: system
inoperative Inactive for left-side
inoperative Inactive for left-side
traffic
traffic
or
Intell.
Intell. Light
Light System:
System: System
System
inoperative Inactive for right-side
inoperative Inactive for right-side
traffic
traffic
display message instead of the
Intell.
Intell. Light
Light System
System
function in the
Lights
Lights
submenu.
Further information on the Intelligent Light Sys-
tem (
Y
page 100).
Setting the dipped-beam headlamps for
driving on the left/right
This function is only available in vehicles with
the Intelligent Light System.
You can use this function to switch between
symmetrical and asymmetrical dipped beam
(
Y
page 97).
X
Press the
=
or
;
button on the steering
wheel to select the
Settings
Settings
menu.
X
Press the
:
or
9
button to select the
Lights
Lights
submenu.
X
Press
a
to confirm.
X
Press the
:
or
9
button to select the
Dipped beams Setting for:
Dipped beams Setting for:
function.
The current setting
Right-side traffic
Right-side traffic
or
Left-side traffic
Left-side traffic
appears.
X
Press the
a
button to save the setting.
If you change the setting, conversion does not
take place until the next time the vehicle is
stationary.
If you set the dipped-beam headlamps for driv-
ing on the right/left, then motorway mode and
the extended range foglamps are unavailable.
These are only deactivated if the setting for driv-
ing on the left/right is set opposite to your vehi-
cle's country version.
A qualified specialist workshop can set the
dipped-beam headlamps for driving on the left/
right.
Vehicle
Activating/deactivating the automatic
locking feature
X
Press the
=
or
;
button on the steering
wheel to select the
Settings
Settings
menu.
X
Press the
:
or
9
button to select the
Vehicle
Vehicle
submenu.
X
Press
a
to confirm.
X
Press the
:
or
9
button to select the
Automatic door locks
Automatic door locks
function.
If the
Automatic door locks
Automatic door locks
function is
switched on, the multifunction display shows
the doors in orange.
X
Press the
a
button to save the setting.
If you activate the
Automatic door locks
Automatic door locks
function, the vehicle is centrally locked above a
speed of around 15 km/h.
For further information on the automatic locking
feature; see (
Y
page 79).
Activating/deactivating the acoustic
locking confirmation
If you switch on the
Acoustic
Acoustic Lock
Lock
function, an
acoustic signal sounds when you lock the vehi-
cle.
Menus and submenus
187
On-board
comput
er
and
display
s
Z
Содержание B 250 e 2015
