Mercedes-Benz B 250 e 2015, Руководство пользователя

Страница: 265 / 293

Removing the towing eye
X
Loosen the towing eye and unscrew it.
X
Place the towing eye in the stowage well
under the luggage compartment floor
(
Y
page 249).
X
Vehicles with a TIREFIT kit: replace the tyre
inflation compressor.
Towing the vehicle with both axles on
the ground
It is important that you observe the safety
instructions when towing away your vehicle
(
Y
page 260).
X
On vehicles with KEYLESS-GO or the KEY-
LESS-GO start function: you must use the
key instead of the Start/Stop button
(
Y
page 127).
The transmission automatically shifts to posi-
tion P when you open the driver's or front-
passenger door or when you remove the key
from the ignition lock. In order to ensure that the
transmission stays in position N when towing
the vehicle, you must observe the following
points:
X
Make sure that the vehicle is stationary.
X
Turn the key to position 2 in the ignition lock.
X
Depress the brake pedal and keep it
depressed.
X
Shift the transmission to position N.
X
Release the brake pedal.
X
Release the electric parking brake.
X
Switch on the hazard warning lamps
(
Y
page 100).
X
Leave the key in position 2 in the ignition lock.
If the 12 V battery indicator lamp lights up, you
must observe the following points:
X
Pull over and safely stop the vehicle as soon
as possible, paying attention to road and traf-
fic conditions.
X
Shift the transmission to position P.
X
Apply the electric parking brake.
i
In order to signal a change of direction when
towing the vehicle with the hazard warning
lamps switched on, use the combination
switch as usual. In this case, only the turn
signals for the desired direction flash. When
you reset the combination switch, the hazard
warning lamps start flashing again.
Towing the vehicle with the front axle
raised
When towing your vehicle with the front axle
raised, it is important that you observe the
safety instructions (
Y
page 260).
!
The ignition must be switched off if you are
towing the vehicle with the front axle raised.
Intervention by ESP
®
could otherwise dam-
age the brake system.
X
On vehicles with KEYLESS-GO or the KEY-
LESS-GO start function: you must use the
key instead of the Start/Stop button
(
Y
page 127).
X
Make sure that the vehicle is stationary.
X
Turn the key to position 2 in the ignition lock.
X
When the vehicle is stationary, depress the
brake pedal and keep it depressed.
X
Shift the transmission to position P.
X
Release the brake pedal.
X
Release the electric parking brake.
X
Deactivate tow-away protection (
Y
page 68).
X
Deactivate automatic locking (
Y
page 187).
X
Switch on the hazard warning lamps
(
Y
page 100).
X
Turn the key in the ignition lock to position 0
and leave the key in the ignition lock.
Towing the vehicle away with the rear
axle raised
When towing your vehicle away with the rear
axle raised, it is important that you observe the
safety instructions (
Y
page 260).
!
The ignition must be switched off if you are
towing the vehicle with the rear axle raised.
Intervention by ESP
®
could otherwise dam-
age the brake system.
262
Recovery
Breakdo
wn
ass
is
tanc
e