Switching SPEEDTRONIC to passive
If you depress the accelerator pedal beyond the
pressure point (kickdown), SPEEDTRONIC is
switched to passive mode. The following mes-
sage appears in the multifunction display:
SPEEDTRONIC passive
SPEEDTRONIC passive
.
You can then exceed the stored speed. SPEED-
TRONIC is activated again if you:
R
drive slower than the stored speed without
kickdown
R
set a new speed or
R
call up the last speed stored again
The
SPEEDTRONIC passive
SPEEDTRONIC passive
message in the
multifunction display disappears.
Deactivating variable SPEEDTRONIC
It is not possible to deactivate variable SPEED-
TRONIC by braking.
There are several ways to deactivate variable
SPEEDTRONIC:
X
Briefly press the cruise control lever forwards
B
.
or
X
Briefly press the cruise control lever in the
direction of arrow
A
.
LIM indicator lamp
;
in the cruise control
lever goes out. Variable SPEEDTRONIC is
deactivated.
Cruise control is selected.
i
The last speed stored is cleared when you
switch off the engine.
HOLD function
General notes
The HOLD function can assist the driver in the
following situations:
R
when pulling away, especially on steep slopes
R
when manoeuvring on steep slopes
R
when waiting in traffic
The vehicle is kept stationary without the driver
having to depress the brake pedal.
The braking effect is cancelled and the HOLD
function is deactivated when you depress the
accelerator pedal to pull away.
Important safety notes
G
WARNING
When leaving the vehicle, it can still roll away
despite being braked by the HOLD function if:
R
there is a malfunction in the system or in
the voltage supply
R
the HOLD function is deactivated by the
accelerator pedal being depressed, e.g. by
a vehicle occupant
R
the electrical system in the engine com-
partment, the battery or the fuses are tam-
pered with
R
the battery is disconnected
There is a risk of an accident.
Before leaving the vehicle, always deactivate
the HOLD function and secure the vehicle
from rolling away.
!
When the HOLD function is activated, the
vehicle brakes automatically in certain situa-
tions.
To avoid damage to the vehicle, deactivate
the HOLD function in the following or similar
situations:
R
when towing away
R
in a car wash
Deactivating the HOLD function (
Y
page 155).
Activation conditions
You can activate the HOLD function if:
R
the vehicle is stationary
R
the engine is running or if it has been auto-
matically switched off by the ECO start/stop
function
R
the driver's door is closed or if your seat belt
is fastened
R
the electric parking brake is released
R
the transmission is in position D, R or N
154
Driving systems
Driving
and
parking
Содержание B 250 e 2015
