Mercedes-Benz B 250 e 2015, Руководство пользователя

Страница: 146 / 293

X
Press the charge socket flap in the direction
of arrow : .
The charge socket flap swings up.
X
Remove socket cap = .
X
Insert the charging cable connector into vehi-
cle socket C to the stop.
X
Wallbox without a preinstalled cable: insert
the charging cable connector into the power
socket of the wallbox to the stop.
The high-voltage battery is charging.
The Ý right indicator lamp B on vehicle
socket C flashes green.
The vehicle must not be moved while the charg-
ing cable is connected or during charging.
i
Depending on the temperature, the engine
cooling system and battery cooling system
may audibly switch on when the charging
cable is connected or during the charging
process.
Removing the charging cable
!
Before driving away, you must ensure that,
for your own safety and to avoid damage, the
charging cable has been removed from the
vehicle socket. Otherwise, you cannot shift
the transmission out of position P.
When the charge level display reaches 100%,
the battery is fully charged (
Y
page 174).
i
The indicator lamps in the vehicle socket
and on the charging cable may remain on for
up to 30 seconds after the charging cable has
been disconnected.
When the battery is charged:
X
Unlock the vehicle.
The Ý right indicator lamp B on vehicle
socket C goes out. The Ì left indicator
lamp A on vehicle socket C lights up white.
X
Remove the charging cable from vehicle
socket C within 30 seconds. Otherwise the
vehicle will relock the vehicle socket.
X
Close socket cap = .
X
Close the charge socket flap.
X
Wallbox without a preinstalled cable: where
necessary, remove the charging cable from
the wallbox and stow it safely in the vehicle.
If the charging cable cannot be removed from
the vehicle socket, unlock the charge socket
flap manually using the emergency release
(
Y
page 143).
Charge socket flap emergency
release
The emergency release is located behind the
side trim panel in the luggage compartment.
X
Open the tailgate.
X
Open cover ; on the left-hand side of the
luggage compartment (
Y
page 106).
X
Pull emergency release : on the cable.
The charge socket flap is unlocked.
i
The cable of emergency release : does not
need to be detached.
X
Open the charge socket flap.
i
Lock and then unlock the vehicle several
times after opening the emergency release.
The cable is then automatically returned to its
initial position by an actuator. You can start
charging after you have unlocked the vehicle
again. Pay particular attention to the indicator
lamps on the vehicle socket (
Y
page 144).
High-voltage battery
143
Driving
and
parking
Z