Mercedes-Benz B 250 e 2015, Руководство пользователя

Страница: 266 / 293

The transmission automatically shifts to posi-
tion P when you open the driver's or front-
passenger door or when you remove the key
from the ignition lock. In order to ensure that the
transmission stays in position N when towing
the vehicle, you must observe the following
points:
X
On vehicles with KEYLESS-GO or the KEY-
LESS-GO start function: you must use the
key instead of the Start/Stop button
(
Y
page 127).
X
Make sure that the vehicle is stationary.
X
Turn the key to position 2 in the ignition lock.
X
Depress the brake pedal and keep it
depressed.
X
Shift the transmission to position N.
X
Release the brake pedal.
X
Apply the electric parking brake.
X
Deactivate tow-away protection (
Y
page 68).
X
Deactivate automatic locking (
Y
page 187).
X
Move the front wheels to the straight-ahead
position.
X
Switch on the hazard warning lamps
(
Y
page 100).
X
Turn the key in the ignition lock to position 0
and leave the key in the ignition lock.
Transporting the vehicle
All vehicles
!
You may only secure the vehicle by the
wheels, not by parts of the vehicle such as
axle or steering components. Otherwise, the
vehicle could be damaged.
X
Turn the key to position 2 in the ignition lock
(
Y
page 126).
X
Shift the transmission to position N.
As soon as the vehicle is loaded:
X
Prevent the vehicle from rolling away by
applying the electric parking brake.
X
Shift the transmission to position P.
X
Turn the key to position 0 in the ignition lock
and remove it.
X
Secure the vehicle.
The towing eye can be used to pull the vehicle
onto a trailer or transporter for transportation.
Electrical fuses
Important safety notes
G
WARNING
If you manipulate, bridge or replace a faulty
fuse with a fuse of a higher amperage, the
electric cables could be overloaded. This may
result in a fire. There is a risk of an accident
and injury.
Always replace faulty fuses with specified new
fuses of the correct amperage.
Blown fuses must be replaced with fuses of the
same rating, which you can recognise by the
colour and fuse rating. The fuse ratings are listed
in the fuse allocation chart.
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified special-
ist workshop, e.g. a Mercedes-Benz Service
Centre.
!
Only use fuses that have been approved for
Mercedes-Benz vehicles and which have the
correct fuse rating for the system concerned.
Only use fuses marked with an "S". Compo-
nents or systems could otherwise be dam-
aged.
The fuses in your vehicle disconnect faulty cir-
cuits. If a fuse blows, all the components on the
circuit and their functions will fail.
Before replacing a fuse
X
Safeguard the vehicle against rolling away
(
Y
page 145).
X
Switch off all electrical consumers.
X
Vehicles without KEYLESS-GO: remove the
key from the ignition lock.
X
Vehicles with KEYLESS-GO start-function
or KEYLESS-GO: open the driver's door.
The on-board electronics now have status 0.
This is the same as the key having been
removed.
The fuses are located in various fuse boxes:
R
fuse box in the engine compartment on the
left-hand side of the vehicle, when viewed in
the direction of travel
R
fuse box in the front-passenger footwell
Electrical fuses
263
Breakdown
assistance
Z