Medica EasyStat Скачать руководство пользователя страница 153

Страница: 153 / 158

147

Medica warrants the EasyStat analyzer will be free of defects in

material and workmanship for a period of twelve months from the

date of purchase excepting only those parts which are consumed

or expended in normal use. In the case of consumables or expend-

ables, the warranty time period shall be the usage time, providing

such consumable or expendable is used prior to any “install by” or

expiration date. The warranty is only applicable when the EasyStat

analyzer is used under normal operating conditions and maintained

in accordance with the instructions in the operator’s manual and if the

EasyStat analyzer has not been subjected to accident, alteration, or

misuse. In the event of failure within the warranty period, Medica will

repair or replace any Analyzer returned and not conforming to the

above warranty or, at its option, refund the purchase price.

THE WARRANTY DESCRIBED ABOVE IS EXCLUSIVE AND IN LIEU

OF ALL OTHER WARRANTIES WHETHER STATUTORY, EXPRESS,

OR IMPLIED (INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE AND ALL WARRANTIES ARISING FROM THE COURSE

OF DEALING OR USAGE OF TRADE). THE BUYER’S SOLE AND

EXCLUSIVE REMEDY IS FOR REPAIR OR REPLACEMENT OF THE

DEFECTIVE ANALYZER OR PART THEREOF, OR REFUND OF THE

PURCHASE PRICE OF SUCH PRODUCT; BUT IN NO EVENT SHALL

MEDICA BE LIABLE TO THE BUYER OR ANY PERSON FOR ANY

SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

OR OTHERWISE WITH RESPECT TO, OR ARISING OUT OF, THE

PRODUCT FURNISHED THEREUNDER.

Representations and warranties made by any person, including

Dealers, representatives and employees, which are inconsistent or in

conflict with, or in addition to, the terms of this warranty shall not be

binding upon Medica unless in writing and signed by one of its officers.

For warranty service in the USA or Canada, please call our Customer

Service Department, 1-800-777-5983. Outside the United States and

Canada, please contact your local distributor.

---

Appendix A

Warranty

Содержание EasyStat































































































































































Результаты поиска

Содержание EasyStat

Отзывы:

Бренды по названию

Популярные бренды

Medica EasyStat, Руководство оператора

Результаты поиска

Содержание EasyStat

Отзывы:

Бренды по названию

Популярные бренды