![MEDAP 5752 4856 Скачать руководство пользователя страница 20](http://html1.mh-extra.com/html/medap/5752-4856/5752-4856_operating-instructions-manual_1759333020.webp)
Safety notes
Product safety notes
20
GA 5752 2300 GB 26
2
WARNING!
Risk of injury!
Aggressive vapours may be generated during the aspiration of liquids.
Use appropriate smoke filter for the aspiration of liquids with highly volatile agents
(e.g. when using iodine as disinfectant).
CAUTION!
Property damage due to oversuction!
The product may only be operated with the overflow protection in place as
otherwise oversuction could occur. A hydrophobic filter offers an additional
protection against oversuction. It closes off the flow of gas to the product. Particles
in the gaseous phase may clog the hydrophobic filter.
Use a bacterial and virus filter which also protects the inside of the aspiration from
bacterial and viruses.
CAUTION!
Observe ambient conditions!
If the ambient conditions are undercut or exceeded during transportation, storage
or operation, functionality may be affected.
Conduct a functional check and rectify any deficiencies.
CAUTION!
Property damage due to foaming!
Foam may be created when extracting secretion. Foam is detrimental to the
functioning of the mechanical overflow protection. This gives rise to the risk of
secretions entering and damaging the aspirator.
Always use a hydrophobic bacterial and viral filter and a commercially available
foam inhibitor.
CAUTION!
Property damage!
Proper functioning of the mechanical overflow protection is only assured with the
product in upright position.
Place the product in upright position during operation. When using a trolley, the
castors must be locked during operation.
CAUTION!
Property damage due to overheating!
If placed on a soft surface (such as pillows or a mattress), the ventilation slots may
be covered and the product will overheat.
The product should be upright and placed on a solid surface during operation.
CAUTION!
Property damage!
Excessive exposure of plastic housing components to ultraviolet radiation leads to
premature material fatigue, resulting in breakage.
Protect the product against direct sunlight.