“3084 Speed Level™ Sigma Lift” Service and Parts Manual
November 2009
Page 3-16
E
N G I N E
M
A I N T E N A N C E
T
HROTTLE
S
OLENOID
A
DJUSTMENT
, D
IESEL
IMPORTANT: – This final adjustment must be made after all other throttle speed adjust-
ments. The solenoid must be free to retract fully in order to turn OFF the High Amperage
Pull Circuit. Improper adjustment will result in solenoid failure and may damage the electri-
cal system.
1. With the engine OFF, manually retract the solenoid by grasping the piston, just ahead
of the boot, and pull to the fully retracted position.
NOTE:
The solenoid must retract and extend smoothly. If movement is impaired it may be necessary to reposition the
solenoid to improvement alignment.
2. With the solenoid piston fully retracted measure the distance between the High
Speed Stop Screw and the Throttle linkage using a .020 feeler gauge.
3. Adjust clearance at the Throttle Solenoid linkage only.
Do not adjust the High Speed Stop Screw.
• Disconnect the linkage at the clevis and turn the clevis to lengthen or shorten as necessary.
• Reconnect the clevis and measure again. Repeat until the measurement is correct.
Figure 3-12:
Diesel Engine Throttle Adjustments
ART_2065
High Speed
Stop Screw
Idle Stop
Screw
.020
Throttle
Solenoid
Throttle
Solenoid
Piston
(Threaded Rod)
Throttle
Solenoid
Adjustment
Throttle
Lever
Throttle Link
Clevis
Содержание Speed Level 2684 ES
Страница 52: ...3084 Speed Level Sigma Lift Service and Parts Manual October 2009 Page 1 32 GENERATOR OPTION 3084RT NOTES...
Страница 104: ...3084 Speed Level Sigma Lift Service and Parts Manual November 2009 Page 3 20 ENGINE MAINTENANCE NOTES...
Страница 142: ...3084 Speed Level Sigma Lift Service and Parts Manual November 2009 Page 4a 38 TROUBLESHOOTING 3084RT MODELS NOTES...