Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
89
89
Subfunction: Send status with off-delay
Single-button function
With the single button function Switching - Sub-function: Send state with switch-off delay, the button
sends the value On for pressing the button and the value Off for releasing the button. However, the
value Off is transmitted delayed by the set time.
The following figure shows the available settings:
Figure 49: Settings: Single-
button function „Switch“
-"send status with off-delay"
The following table shows the available communication objects:
Number
Name
Length
Usage
100
Direct button 1
–
send status
1 Bit
Switch function of the button
103
Direct button 1
–
State for display
1 Bit
State to refresh the display/symbol on the
button; has to be connected to the state of the
actuator to be switched
Table 84: Communication objects - Single-
button function „Switch“
-"send status with off-delay"
Presentation
Single-button function
Two-button function
The switching function can display the two possible states (on/off) by freely selectable symbols with
a freely selectable color. Though the evaluated status is visualized:
Figure 50: Presentation of switch-function on display
