Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
81
81
4.8.5.4 Ventilation control levels
Single-button function
Two-button function
The "Ventilation control levels" function accesses the internal ventilation control and controls the
level switching.
The following settings are available (here for two-button function):
Figure 40: Settings - Ventilation control levels
The following table shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Assignment of push
buttons
▪
Increase/decrease levels
▪
Decrease/increase levels
Parameter defines the polarity of
the keys.
Only for two buttons Function
Activate auto mode
•
Inactive
•
Active
This parameter defines whether
this function switches the
ventilation to automatic mode
after the highest level or below
the lowest level.
Table 76: Settings - Ventilation control levels
If the "Activate auto mode" parameter is set to active, the ventilation is switched to automatic mode
after exceeding the last level or falling below the last level.