MD Helicopters MD900 with PW206E, Руководство по эксплуатации самолета

Страница: 318 / 450

CSP–900RFM206E–1
ROTORCRAFT FLIGHT MANUAL
MD900 With PW 206E
Handling Servicing
and Maintenance
Original
8–8
If possible, park helicopter into the prevailing wind and secure in accordance
with normal parking conditions.
Statically ground helicopter (Ref. Figure 8−3).
F92–105
GROUNDING JACK
(2 LOCATIONS)
CABLE PLUG
Figure 8–3. Helicopter Grounding
Helicopter Storage
Install protective covers as necessary (Ref. Figure 8−2) to prevent entry of blowing
dust, water, freezing rain, snow and/or foreign objects into the helicopter during
ground storage.
Maintain full fuel cell to reduce condensation in the cell.
Ensure drain holes are free of debris and kept open during storage period.
Store helicopter in hangar, if space allows.
Statically ground helicopter (Ref. Figure 8−3).
Flyable Storage
Flyable storage will maintain a stored MD Explorer in an operable condition.
If daily use is impractical, the following procedures will keep the helicopter
in flyable condition. At regular intervals inspect helicopter. Date and type
of storage must be recorded in helicopter records.
Perform engine run−up, at least once every five days.
Perform pre−flight inspection, at least once every seven days.
Inspect helicopter and treat for corrosion control.
Inspect static ground wires, blade tiedowns and mooring devices at regular
intervals.
Inspect tiedowns immediately after winds exceeding 35 knots .
Enter type of storage and date helicopter was placed in storage, in helicopter
records.