MD Helicopters MD900 with PW206E, Руководство по эксплуатации самолета

Страница: 313 / 450

CSP–900RFM206E–1
ROTORCRAFT FLIGHT MANUAL
MD900 With PW 206E
Handling Servicing
and Maintenance
Original
8–3
Avoid sudden stops and starts.
Avoid short turns, which could cause helicopter to turn over.
A safe minimum turning radius is approximately 20 feet.
Allow inside wheel to turn (not pivot) while helicopter is being turned.
Helicopter Transport
The heli−porter is designed for the MD Explorer with the use of a towing tractor
or vehicle.
The heli−porter is a welded tubular steel frame with dual pneumatic swivel
caster on the front and rear. The platform is a grated walkway with hold down
safety straps for the landing gear. The heli−porter has a hand brake to the rear
tires and has a 10,000 lb (4540 Kg) capacity.
Ensure all stress panels listed in Figure 8−11 are installed.
Airframe structure damage can occur if stress panels are not in
place before moving helicopter.
Land or hoist helicopter (Ref. RMM, Section 07−10−00) on heli−porter platform.
Attach safety hold−down straps to skid tubes.
Release heli−porter hand brake.
When ground handling helicopter do not lift main rotor blades to
clear objects. The main rotor should be rotated to clear objects.
To prevent rotor component damage, the main rotor hub deflection
for a non–operating rotor is not to exceed four feet up, maximum.
Measurement to be taken from static rest.
Do not tow helicopter at speeds over 5 mph. A safe minimum turning
radius is approximately 20 feet.
Attach heli−porter hook−up to a tow vehicle.
CAUTION
CAUTION
CAUTION
CAUTION