McDonald's C602, Руководство пользователя

Страница: 64 / 114

62
13. Install the shake freezer door. Position the freezer
door on the four studs on the front of the freezing
cylinder. Align the top of the draw valve with the valve
lifter bracket. Install the handscrews (short
handscrews at the bottom of the door). Tighten
equally in a crisscross pattern to ensure the door is
secured.
Do not overtighten. (See Figure-122.)
Figure-122
14. Lubricate the shaft of the spinner blade up to the
groove. (See Figure-123.)
Figure-123
15. Insert the spinner blade shaft into the center of the
driven spinner and through the draw valve cavity until
the shaft appears at the top of the draw valve. The
spinner blade must be aligned and engaged with the
driven spinner at the bottom. This allows the spinner
shaft to rise high enough to be engaged in the
spinner coupling at the top. (See Figure-124.)
Figure-124
16. Raise the locking collar of the spinner coupling and
insert the spinner shaft into the cavity of the coupling
until the locking collar can drop into the locked
position. (See Figure-125.)
Figure-125
17. Snap the restrictor cap over the end of the door spout
and install the syrup valve retainer pins.

(See Figure-126.)
Figure-126