McDonald's C602, Руководство пользователя

Страница: 38 / 114

36
8. Install the restrictor cap on the freezer door spout.
(See Figure-27.)
Figure-27
9. With the pail still beneath the door, remove the syrup
nose fitting from the syrup line fitting by turning it
counterclockwise. Hold the syrup fittings in an up
position to minimize syrup loss. (See Figure-28.)
Figure-28
10. Remove the duckbill valve and O-ring from the syrup
nose fitting. (See Figure-29.)
Figure-29
11. Using the white end of the double-ended brush,
scrub the inside of the syrup nose fitting to remove
any residual particles.
12. Using a shake cup filled with KAY-5
®
Sanitizer (HCS)
solution, rinse the syrup nose fitting thoroughly.
13. Using a clean, sanitized towel, gently wipe any syrup
from the duckbill valve.
14. Using a shake cup filled with KAY-5
®
Sanitizer (HCS)
solution, thoroughly rinse the duckbill valve.
15. Install the duckbill valve into the syrup nose fitting
with the flat end aligned with the open slot in the
syrup nose fitting.
Note: Replace the duckbill valve if it is damaged or
extends past the syrup nose fitting slot.

(See Figure-30.)
Figure-30
16. Install the syrup nose fitting onto the syrup line fitting.
Tighten by hand until secure.
Note: The duckbill valve must be wet when the syrup
nose fitting is installed on the syrup line fitting. The
sanitized water will lubricate the bottom flat surface and
prevent the duckbill from twisting when tightening the
syrup nose fitting.