McDonald's C602, Руководство пользователя

Страница: 45 / 114

43
10. Return to the freezer with a small amount of cleaning
solution. With a pail below the door spout, dip the
door-spout brush into the cleaning solution and
brush-clean the syrup ports in the freezer door, door
spout, bottom of the driven spinner, spinner blade,
and syrup line fittings. (See Figure-55.)
Figure-55
Note: To ensure sanitary conditions are maintained,
brush each item for a total of 60 seconds, repeatedly
dipping the brush in cleaning solution.
11. With the syrup-port brush, brush each syrup port hole
10 to 15 times. Dip the brush in the cleaning solution
before brushing each port. (See Figure-56.)
Figure-56
12. With sanitized hands, remove the syrup valve
retainers. Brush-clean the retainers and retainer
holes. Replace the syrup valve retainers.
13. Fill the squeeze bottle with cleaning solution. With a
pail beneath the door, insert the tube end of the
squeeze bottle into the syrup ports and squeeze the
bottle firmly. This action will force solution out of the
adjacent port and down around the spinner. This
procedure should be performed for at least

10 seconds per port. (See Figure-57.)
Figure-57
14. Place the spout cap O-ring in the spout cap. Fill the
spout cap with sanitizing solution. Install the spout
cap over the end of the door spout. (See Figure-58.)
.
Figure-58
15. Raise each retainer pin. Install the syrup hole plugs in
the syrup ports in the freezer door. Lower the retainer
pins to secure the hole plugs in the door.

(See Figure-59.)
Figure-59