McDonald's C602, Руководство пользователя

Страница: 89 / 114

87
Selecting the Calibrate symbol will advance the
screen to the next zone. The second temperature zone
displayed is the left barrel (LB). (See Figure-233.)
Figure-233
Select the Calibrate symbol to advance to the next
temperature zone, the right hopper (RH).

(See Figure-234.)
Figure-234
Select the Calibrate symbol to advance to the last
temperature zone in the recorded sample, the right barrel
(RB). (See Figure-235.)
Figure-235
Select the Calibrate symbol again to advance to the
next sample. Each sample is displayed in 5-minute
increments. (See Figure-236.)
Figure-236
When the final sample in the phase is displayed, the Heat
cycle results screen can be selected. (See Figure-237.)
Figure-237
If the Cool phase temps or All phase temps were
reviewed, the final temperature zone sample in the
record will be displayed with the selection for the result
screen. (See Figure-238.)
Figure-238
Select the Calibrate symbol to view the Heat cycle
results screen. (See Figure-239.)
Figure-239
To view the details for the same phase in the preceding
record ( Next record ), select the Calibrate symbol . If
All phase temps was selected, the record number will
remain the same and the next phase sample will be
displayed. (See Figure-240.)
Figure-240
Exit the record screens by moving the arrow to Exit and
select the Calibrate symbol .
The average Heat Treatment cycle will contain
approximately 40 samples of the four temperature zone
screens.
The
System Information is displayed on four separate
screens. The first screen contains the control and
software version installed in the machine.

(See Figure-241.)
Figure-241
Select the Calibrate symbol to advance to the next
system information screen containing the software
language version. (See Figure-242.)
Figure-242