McDATA Enterprise Operating System, Руководство пользователя

Страница: 25 / 328

1
Introduction
1-5
Entering Command Line Interface Commands
Command Tree The command tree of the CLI begins from the root. Table 1-2 shows
the CLI command tree. The commands in the four extended branches
(config, maint, perf, and show) are described in
Chapter 2, CLI
Commands .
The following commands are not listed in the command tree, but are
globally available and are documented in this chapter:
• login (see login on page 1-15)
• logout (see logout on page 1-16)
• commaDelim (see Using the commaDelim Command on page 1-17)
Table 1-2 shows the command tree hierarchy from the root, reading
from left to right.
Table 1-2
CLI Command Tree
config---------- enterpriseFabMode--- setState
features ----------------- enterpriseFabMode
ficonMS
installKey
NPIV
openSysMS
openTrunking
show
fencing------------------- addPolicy
addPort
deletePolicy
removePort
setParams
setState
show
showTypeTable
ficonCUPZoning------- addControlHost
deleteControlHost
setState
show
ficonMS------------------ setMIHPTO
setState
show