McDATA Enterprise Operating System, Руководство пользователя

Страница: 79 / 328

2
CLI Commands
2-35
config
NOTE: This command requires that the SANtegrity Authentication feature
key be installed.
Parameters This command has one parameter:
Command Example
Root> config security authentication interface eport
outgoing disable
config.security.authentication.interface.eport.sequence
Syntax
sequence method1 [method2]
Purpose This command sets the sequence that the E port interface will use to
authenticate. When the preferred method cannot be contacted, the
backup method will be used to authenticate the remote end of the
ISL.
NOTE:
This command requires that the SANtegrity Authentication feature
key be installed.
Parameters This command has one required parameter, and one optional
parameter:
enabledState This parameter enables and disables
outgoing CHAP authentication on all
ISLs. Accepted values for this parameter
are
enable or disable . Boolean 1 and 0
values may also be substituted.
method1 This sets the preferred method of
authentication. Accepted values are
local
or RADIUS .
method2 This optional parameter sets the backup
method of authentication. This backup
method is used when the preferred
method cannot be contacted. Accepted
value is
local .