McDATA Enterprise Operating System Скачать руководство пользователя страница 2

Страница: 2 / 328

Enterprise Operating System Command Line Interface User Manual

Record of Revisions and Updates

Printed December 2004
First Edition

No part of this publication may be reproduced or distributed in any form or by any means, or stored in a

database or retrieval system, without the prior written consent of McDATA Corporation. The information

contained in this document is subject to change without notice. McDATA Corporation assumes no

responsibility for any errors that may appear.

All computer software programs, including but not limited to microcode, described in this document are

furnished under a license, and may be used or copied only in accordance with the terms of such license.

McDATA either owns or has the right to license the computer software programs described in this document.

McDATA Corporation retains all rights, title and interest in the computer software programs.

McDATA Corporation makes no warranties, expressed or implied, by operation of law or otherwise, relating

to this document, the products or the computer software programs described herein. McDATA

CORPORATION DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR

A PARTICULAR PURPOSE. In no event shall McDATA Corporation be liable for (a) incidental, indirect,

special, or consequential damages or (b) any damages whatsoever resulting from the loss of use, data or

profits, arising out of this document, even if advised of the possibility of such damages.

Fabricenter, HotCAT, Intrepid, Multi-Capable Storage Network Solutions, Networking the World's Business

Data, nScale, nView, OPENready, SANavigator, SANpilot, SANtegrity, SANvergence, SecureConnect and

Sphereon are trademarks or registered trademarks of McDATA Corporation. OEM and Reseller logos are the

Revision

Date

Description

620-000134-000

11/2001

Initial release of Manual

620-000134-100

05/2002

Updates for E/OS 2.0

620-000134-200

08/2002

Updates for E/OS 3.0

620-000134-300

09/2002

Updates for E/OS 4.0

620-000134-400

10/2002

Updates for E/OS 4.1

620-000134-500

10/2002

Updates for E/OS 4.1 CD-ROM final

620-000134-600

2/2003

Updates for E/OS 5.1 and EFCM 7.1

620-000134-601

7/2003

Updates for E/OS 5.5

620-000134-700

10/2003

Updates for E/OS 6.0

620-000134-710

12/2003

Updates for E/OS 6.1

620-000134-720

6/2004

Updates for E/OS 6.2

620-000134-730

01/2005

Updates for E/OS 7.0

Содержание Enterprise Operating System









































































































































































































































































































































Результаты поиска

Содержание Enterprise Operating System

Отзывы:

Похожие инструкции для Enterprise Operating System

Бренды по названию

Популярные бренды

McDATA Enterprise Operating System, Руководство пользователя

Результаты поиска

Содержание Enterprise Operating System

Отзывы:

Похожие инструкции для Enterprise Operating System

Бренды по названию

Популярные бренды