Mazda 626 Station Wagon, Руководство по ремонту

Страница: 251 / 577

AUTOMATIC TRANSAXLE
2. Using a flathead screwdriver to prevent the drive
plate from rotating, remove the torque converter
nuts.
Transaxle Removal Note
1. Loosen the SST (engine support) and lean the
engine toward the transaxle.
Warning
• Do not allow the transaxle to fall from the
jack.
3. Remove the transaxle mounting bolts.
4. Remove the transaxle.
Transaxle Installation Note
Warning
• Do not allow the transaxle to fall from the
lack.
1. Set the transaxle on a jack and lift it.
2. Install the transaxle mounting bolts.
Tightening torque
A:90—116 Nm {9.1—11.9 kgf-m, 66—86 ftlbf}
B:38—51 N m {3.8—5.3 kgf-m, 28—38 ft lbf}
C:19—25 N m {1.9—2.6 kgf-m, 14—18 ft lbf}
A
No.4 Engine Mount Installation Note
1. Install the No.4 engine mount bracket by passing it
through the stud bolt on the transaxle.
2. Match the positions of the No.4 engine mount
bracket and the rubber, then temporarily tighten
installation bolt A.
3. Tighten installation nut A, then tighten bolt B.
Tightening torque
A: 67—93 N m {6.8-9.5 kgf-m, 50—68 ft lbf}
B: 86—116 Nm {8.7—11.9 kgf-m, 63—86 ft lbf}
K 2-44