MANATEC Fox 3D Smart Mobile PT, Руководство по обслуживанию

Страница: 2 / 104

INDEX
Page No.
1. WARRANTY
– STATUTORY CLAUSE
1
2. INSTALLATION REQUIREMENTS 2
2.1. POWER REQUIREMENT
2
2.2. SPACE REQUIREMENTS
3
2.2.1. ALIGNMENT PIT DIMENSIONS (Applicable only for PT / VH / Wall mount models) 3
2.2.2. ALIGNMENT LIFT DIMENSIONS (Applicable only for VH / Wall mount / Auto Boom / In-Lift) 8
3. PACKING IDENTIFICATION 17
4. INTEGRATION 21
4.1. EQUIPMENT INTEGRATION
21
4.1.1. VERTICAL COLUMN 21
4.1.2. HORIZONTAL BEAM (NA for In-Lift model) 24
4.1.3. MAIN CABINET (NA for In-Lift model) 25
4.1.4. PC ACCESSORIES COLUMN (For Drive Through model) 25
4.1.5. PC ACCESSORIES COLUMN (For In-Lift model) 26
4.2. FOUNDATION
26
4.2.1. VERTICAL COLUMN (Applicable only for PT / VH / AVH models) 26
4.2.2. WALL MOUNTING BRACKET 28
4.3. COMPUTER & PERIPHERALS INTEGRATION
29
4.3.1. PT / VH / AVH MODEL 29
4.3.2. VH / AVH MODEL WITH MAIN CABINET 29
4.3.3. DRIVE THROUGH MODEL 29
4.3.4. IN-LIFT MODEL 29
4.4. ROUTING
30
4.4.1. PT / VH MODELS 30
4.4.2. AVH MODEL 31
4.4.3. DRIVE THROUGH MODEL (USB3.0 configurations) 33
4.4.4. IN-LIFT MODEL (USB3.0 configurations) 34
5. DESCRIPTION OF MAIN PARTS 35
5.1. CAMERA BEAM / COLUMN
35
5.1.1. CAMERA (LH & RH) 35
5.1.2. IR LED BOARD 36
5.1.3. LED DRIVER BOARD & HUB BOARD 36
5.2. INTERFACE BOX
37
5.2.1. EMI FILTER BOARD (applicable only for PT / VH / In-Lift models) 39
5.2.2. SMPS 39
5.2.3. MOTOR CONTROL BOARD (applicable only for AVH model) 39
5.2.4. MOV BOARD (applicable only for AVH model) 39
5.3. TARGET PLATE
39
5.4. VERTICAL COLUMN (AVH / AutoBoom model)
40
5.5. DESKTOP COMPUTER
42
6. SOFTWARE INSTALLATION 43
6.1. ALIGNMENT PC SOFTWARE
43
6.1.1. STEP-1 : Windows OS installation 43
6.1.2. STEP-2 : Wheel Aligner 3D Setup installation 48
6.1.3. ALIGNMENT PC SOFTWARE UPDATE 55
6.2. INTERNATIONAL VEHICLE DATA (Refer scope of supply)
56
7. CALIBRATION 57
7.1. BEAM INSTALLATION
57
7.2. FLOOR CALIBRATION
58
7.3. SENSOR (DUAL AXIS) CALIBRATION
58
7.4. CAMERA CALIBRATION
60
7.4.1. FOUR SHAFT CALIBRATION 60
7.4.2. SINGLE SHAFT CALIBRATION (Applicable for the Ver.3.06 & below only) 72
7.4.3. TARGET PLATE CALIBRATION (Only for spare replacement) 78
7.5. CALIBRATION CHECK
79
7.6. CALIBRATION CERTIFICATE
79
7.7. AUTOBOOM TEST
79
7.8. MANUAL (SELF) CALIBRATION
79