MANATEC Fox 3D Smart Mobile PT, Руководство по обслуживанию

Страница: 78 / 104

Ref.: 3DWA - SM Ver.1.8
75
Press NEXT SCREEN button to go to Target plate identification screen.
Fig. 134
Once the images of the target plates are identified, the following screens will
displayed:
Fig. 135
Move the Calibration stand forward or backward as guided (arrow blinking) by
the system on the screen to get equal distance (RLZD = RRZD) between the
Camera to the Rear Target plates for left & right side.
Once the distance is achieved, move the Calibration stand in horizontal
direction either left of right side as guided by the system on the screen. The
readings will become green after achieving the all the readings are within
±1mm. Try to get the difference values zero for the distance and shift values
for better accuracy. Ensure spirit level once again.
Fig. 136