MANATEC Fox 3D Smart Mobile PT, Руководство по обслуживанию

Страница: 85 / 104

Ref.: 3DWA - SM Ver.1.8
82
8.3. CAMERA VISION SETTING (Only for spare replacement)
This feature should be used only by authorised Service personnel. Hence
User should not enter into this module
Click CAMERA VISION SETTING in the settings screens to adjust both the Camera
vision for parallelism
1.
Fix the new camera and tighten the M6 screws.
Fig. 152
2. Now, ensure both Left & Right XD distance will be equal in values. If not, proceed
for Camera calibration.
3. Mount the Front Target plate at 2.8mtr (For Smart models
– 2mtr) and Rear
Target plate in calibration stand.
4. Follow the Camera calibration procedure.
8.4. LEFT / RIGHT STEERING WHEEL SETTING
This feature should be used only by authorised Service personnel. Hence
User should not enter into this module
This screen provides the following settings:
Fig. 153
1. Option to select either Right hand drive or Left hand drive vehicle, according to
the type of vehicle being considered for alignment.
2. Option to select either Odometer entry is required or not.
3. Option to select Scissor Lift or Pit model.
Press SAVE button
8.5. DISTRIBUTOR INFORMATION
This feature should be used only by authorised Service personnel. Hence
User should not enter into this module
This option is provided to enter the Distributor Name, address and to add Logo, which
will be reflected in the Result printout & outputs.