MANATEC Fox 3D Smart Mobile PT, Руководство по обслуживанию

Страница: 51 / 104

Ref.: 3DWA - SM Ver.1.8
48
o) Once the installation is over, restart the PC.
Fig. 63
p)
Go to “Language options” in the Control panel and select the preferred
Language and then select “Make this the primary language” to set it as
default language.
Fig. 64
q) Install all Driver files ap
plicable for the Mother board from Manufacturer‟s
website/CD.
NOTE:
i.
Set screen resolution to 1280x768 by selecting “Screen resolution” in
Right click option at Desktop.
ii. DO NOT plug the USB cable from the Horizontal beam / Vertical column
to the PC during OS installation.
iii. Make sure the Printer is installed and set as default Printer.
iv.
The PC should have “d:” partition with a minimum free space of 10GB.
6.1.2. STEP-2 : Wheel Aligner 3D Setup installation
.NET Framework installation
1. Insert the 3D software installation CD.
2.
Copy “Install .NET Framework 3.5 via DISM.exe” and “WA32AXXX.exe”
from CD to Desktop.
3. Remove the 3D software CD from CD Drive and insert Windows10
IOT(X64) CD into Drive.
4.
Right click “Install .NET Framework 3.5 via DISM.exe” and select “Run
as admin
istrator” option to execute the program as shown below:
Fig. 65