MANATEC Fox 3D Smart Mobile PT, Руководство по обслуживанию

Страница: 79 / 104

Ref.: 3DWA - SM Ver.1.8
76
Click SAVE button to save the angle zero offset values. After saving the zero
offset, the following screen will be displayed.
Fig. 137
Note: If you want to calibrate the target plate error calibration, click the target
plate calibration button and follow the screen guided steps.
Press NEXT SCREEN button to go to front angle zero offset save option.
Shift the Calibration kit from rear location to front. Place the kit on the rotary
plates (turn tables) at the distance (2000mm) as shown in the screen and level
the shaft using the spirit level. Remove the rear image plates & Mount the
front target plates in the respective locations (i.e. left image plate on Left side
and right image plate on Right side of the calibration kit) and level them. Press
NEXT SCREEN button to go to Target plate identification screen.
Fig. 138
Fig. 139
Once the images of the target plates are identified, the following screens will
displayed. Move the Calibration stand forward or backward as guided (arrow
blinking) by the system on the screen to get equal distance between the
Camera to the front Target plates for left & right side (FLZD =FRZD). Once
the distance is achieved, move the Calibration stand in horizontal direction
either left of right side as guided (arrow blinking) by the system on the screen.